Dental tools are expensive and tend to be delicate. That can make proper controls and care of supplies very important, given that the average dentist spends $50,000 on clinical supplies each year. If equipment is damaged and needs to be replaced more often, you’re working against your revenues and impacting your ability to grow.
When you’re using a poor-quality air compressor system that delivers either dirty air or an dental air compressor that delivers air at a lower pressure than required, you’ll see low-quality or even no operation of these devices. If air pressure is good, but the air itself is unclean, then you’re risking internal damage to those units, reducing their overall lifespan.
The biggest concern is moist air that can harm delicate internal machinery and quickly make your tools unusable. Moisture can lead to corrosion, microorganism contamination and decrease the precision of your tools. For those who select a low-quality air compressor, a common issue is carbon buildup that poses an even greater danger to the machinery in handpieces.
Electric dental handpieces also tend to have a greater cost and a higher number of parts that you’ll need to maintain, while air-driven pieces can be obtained in full, often for less than $1,000. Air-driven handpieces also tend to be lighter and easier to handle, with the latest innovations providing greater torque so you can use them for many applications over a longer period of time.
Because you’re working with an oil-free compressor, you may also face louder compression cycles. The good news is that most dental offices are using compressors small enough to be fitted with filter silencers, significantly reducing the noise your unit will make.
Silencers can make sure the environment stays enjoyable for your patients and staff, so they can continue to operate without any safety equipment and so that you’re not creating an environment with any long-term risks related to your use of compressed air.
Oil-less compressors also tend to generate higher heat outputs and have a greater possibility of creating condensation, so they need plenty of room to vent and have air circulate around them. This is typically good news, because it means there is usually enough space to install silencers and covers which can reduce noise, while ensuring the proper breathing room for a full-functioning air compressor.