The Difference Between Two Dental Wet Model Trimmer Trimming Models

Let’s take a look at our dental lab model trimmers today. Is the cutting wheel all covered with stone or plaster? Are you pushing harder on the mold to get the trimming done? If so, it is time to either replace the wheel, or in most cases simply flip the disk over to expose a new cutting surface. While you have the door open, you can easily check the water tube for proper flow of water and be sure that drain is not plugged up .

picture 1

Also, take a moment to look at the door seal. In certain older models, the gasket might no longer be made by the factory. However, one can be made… and you can call me for instructions on how to get one. After looking at the model trimmer, lets look at the plaster trap. You can either replace the liner or replace the whole canister if you using the disposable type. Never throw needles or old instruments down the drain into the plaster trap.

Dental Wet Model Trimmer Trimming Models 2,800RPM Diamond Disc Dental Lab Equipment( picture 1 ):

AX-MTA Wet Model Trimmer mad from cast aluminium, the angle can be adjusted to more than 30° which enables the users to achieve perfect trimming quality.
Technical Data
Power Supply: 220V/110V 50/60Hz
Power Consumption: 370W
Rotational Speed: 2,800RPM
Water Pressure:0.5~2kg
Disc Size: 25.5cm/2.55cm/0.65cm (OD/ID/T)
Disc Materials: Corundum/Diamond
Water Supply Method: Manual
Dimensions: 32cm x 20cm x 43cm (H W D)
Shipping Dimensions: 38cm x 36cm x 49cm (H W D)

picture 2

Weight: 20kg


Dental Lab JT® Wet Model Trimmer Abrasive Disc Wheel JT-19C( picture 2 ):

Effective: Cut effortlessly through its 2800 rpm.
Stable: More than 20 kg mounted on non-slip feet .
Griding Water Or Dry: The trimmer can be transformed labor water dry work , but work in water is recommended .
Silent: Disk bored avoids noise and vibration.
Ergonomic: External forms rounded , easy cleaning. Wide graduated and tilting table . Window full screen . Plaster size can work at 3 different angles , you can adjust the screws .
Technical Specifications:
Voltage: 220V/50Hz ± 10% 110V/60Hz ± 10%
Power: 500W
Speed ​​: 2800 r / min
Dimensions: 44 × 35 × 35cm
Weight: 20kg